ELEPHANT Technology

Manual cleaning for manual workstations

Key Facts

  • Manual cleaning process

    with pulsating compressed air and ionisation

  • Pulsed compressed air

    releases particles from undercuts and depressions

  • ELEPHANT

    is the alternative to conventional ionisation guns

  • Mobile and flexible
  • Die ELEPHANT-Technologie vereint die Vorteile einer Ionisationspistole mit denen eines Industriestaubsaugers in einem handgeführten Reinigungsgerät, das eine gründliche und saubere Reinigung von Bauteilen ermöglicht. Anstatt die gelösten Partikel im Arbeitsraum zu verteilen, werden diese direkt dort abgesaugt, wo sie entstehen, sodass der Arbeitsplatz und die Umgebung sauber bleiben.

    Das handgeführte Gerät nutzt eine integrierte aktive Ionisation, um die elektrostatischen Bindungskräfte zwischen Staubpartikeln und der Bauteiloberfläche zu neutralisieren. Zusätzlich wird eine gepulste Druckluft durch die Reinigungsdüse eingesetzt, um die Partikel zu lösen und selbst aus Hinterschneidungen und Vertiefungen der Bauteile zu entfernen. Die gelösten Partikel werden zuverlässig von der Absaugung erfasst und einer Filtereinheit zugeführt. Eine Bürste sorgt dabei für eine schonende Reinigung der Bauteile.

    Mit dem ELEPHANT-Reinigungsgerät können nahezu alle Bauteile schnell und einfach im Trockenverfahren gereinigt werden, ohne dass spezielle Vorkenntnisse erforderlich sind.

  • KIST + ESCHERICH Operating Principle ELEPHANT
    1. 1

      Component to be cleaned

    2. 2

      Ionisation

      Electrostatic binding forces between material and particles are actively neutralised with focused positive and negative ions. These ions are attracted to the oppositely charged areas of the material surface respectively.

    3. 3

      Brush

      The brush reliably loosens mechanically adhering particles. The loosened particles are then accelerated with compressed air and safely suctioned off.

    4. 4

      Compressed air

      The particles loosened by ionisation and brush are blown off the surface to be cleaned using compressed air. A sensor, integrated in the handle, controls the compressed air supply.

    5. 5

      Suction

      The dust-laden output air is reliably suctioned off via the suction channel integrated in the ELEPHANT and fed into an ES suction unit.

  • KIST + ESCHERICH System Installation ELEPHANT
    1. 1

      ELEPHANT

      The ELEPHANT cleaning systems are offered in a straight or pistol-shaped design for hand-guided operation or as stationary-mounted variants. The brushes are available in different materials and fibre thicknesses.

    2. 2

      Spring balancer + holder

      Holders are provided on the side to rest the ELEPHANT system when not in use. Balancers and holders allow the cleaning module to be suspended and easily fed in from above.

    3. 3

      Hose and cable package

      The loosened particles are reliably taken up into the suction channel built into ELEPHANT and fed through the suction hose into a filter unit. HV cable, compressed air hose and sensor line are routed in a hose package parallel to the suction hose.

    4. 4

      Compressed air control

      The air pressure used to clean the surface is adjustable to suit the application. The cleaning effect can be optimised with an AIR CONTROL unit, which generates pulsating compressed air. Pulsing the compressed air using AIR CONTROL will save 50% on the compressed air. The pulse frequency can be set from 5–25 Hz.

    5. 5

      Compressed air maintenance unit

      The supplied compressed air is filtered by a maintenance unit.

    6. 6

      HV power supply

      ELEPHANT systems are supplied with a special transformer, which transforms the mains AC voltage to the required high voltage of approx. 6 kV. Models with integrated function monitoring and error signal are available.

    7. 7

      Suction/Filter unit

      The ES 42 suction unit can be used with an ELEPHANT and also has an integrated interface for function monitoring and remote control.

Related Products